Product Introduction
HS series of hydraulic power units are mobile hydraulic power supply stations in the form of electric trolleys with such advantages as space-saving, quick heat dissipation, ease to operate, ease to move around.
Features
Hydraulic system uses variable high pressure piston pump. The output pressure is stable. As a result of the proportional function, the pressure responses to the load lag for about 10ms. The response lag can greatly improve the impact resistance of the tool, increase the life of the tool, save the cost and improve the efficiency. At the same time, proportional control can significantly reduce system power consumption by about 30% and reduce the hydraulic system heat.
It uses step less speed variation. A single person can complete all the operation
It adopts compact design, reduces the installation volume and the quality. Compact structure facilitates the mobile transportation.
Technical Parameters
Model
|
HS-10
|
Drive mode
|
Electric
|
Rated pressure
|
P=10Mpa
|
Rated flow
|
Q=38L/min
|
Rated power
|
N=7.5KW(10HP)
|
Rated speed
|
n=1450 r/min
|
Shipping dimensions
|
1000x920x620(mm)
|
Shipping weight
|
300kg
|
Equipment Overview
The hydraulic truck HS-10 consists of a motor and a variable piston pump. The entire hydraulic system, using a one-piece structure and equipped with casters and push hands, is easy to move. It also makes the pipe connection easier with quick change connector.
The air cooling system can ensure that the equipment operate continuously within 40 ambient temperature.
The control panel has an emergency stop button for emergency use.
It adopts step less speed control system to adjust the different speed.
The quick connector can be quickly plugged and pulled without leakage to ensure that users can quickly access.
Product Advantages
Hydraulic power units designed for pipeline processing equipment are suitable for most of the working conditions. HS series is easy to operate with a wireless remote control module, which means less training time to operate the hydraulic power station.
The imported motors, pumps parts and the optimized hydraulic systems ensure the hydraulic power units to operate with stable and efficient output, thus providing strong assurance for high quality cutting and beveling effect.
Operating Steps of Hydraulic Unit
Move the device to the appropriate machining position.
Add the low-temperature anti-wear hydraulic oil from the oil filler to the top of 1/5 level of the tank.
Connect the power cord, open the cabinet to ensure that the phase and phase sequence protection relay work indicator light is always on the state. If not, replace the power line phase sequence until the work indicator is light.
Start the motor and then stop and observe from the motor tail whether the motor rotation is rotated clockwise.
Press the motor start button to start the motor and turn on the enable switch to supply the hydraulic motor. Control the speed switch to adjust the hydraulic motor speed.
Information and feedback
Maintenance Information:
Before the machine or any of its accessories is returned for maintenance, please call Bohyar Company. We will give suggestions on transportation and handover of the machine or accessories, and estimate the time and cost of corresponding maintenance
Feedback:
To constantly improve the satisfaction of users with the product quality and service, we will appreciate if you contact us to present any better operation or service methods of the equipment or any suggestion on the optimization of any technical data. We will consider and undertake to validate your precious suggestions, so as to modify or update the product and operation manual for improvement.